Skip to content
Snippets Groups Projects
Commit 2843ba48 authored by unknown's avatar unknown
Browse files

Signed-off-by: unknown <crnf@.(none)>

parent f5de6a8c
No related branches found
No related tags found
No related merge requests found
Format is tab separated bookend settings.
_Name Value
WindowPosition 700+0
Open File for Bookend
Activate Bookend True
Name of End File: end.gcode
Name of Start File: start.gcode
Format is tab separated bottom settings.
_Name Value
WindowPosition 700+0
Open File for Bottom
Activate Bottom False
Additional Height over Layer Thickness (ratio): 0.5
Altitude (mm): 0.0
SVG Viewer: webbrowser
Format is tab separated carve settings.
_Name Value
WindowPosition 700+0
Open File for Carve
Add Layer Template to SVG True
Extra Decimal Places (float): 2.0
Import Coarseness (ratio): 1.0
Infill in Direction of Bridge True
Layer Thickness (mm): 0.3
Layers From (index): 0
Layers To (index): 912345678
Correct Mesh True
Unproven Mesh False
Perimeter Width over Thickness (ratio): 1.8
SVG Viewer: webbrowser
Format is tab separated chamber settings.
_Name Value
WindowPosition 700+0
Open File for Chamber
Activate Chamber: False
Bed Temperature (Celcius): 60.0
Chamber Temperature (Celcius): 30.0
Holding Force (bar): 0.0
Format is tab separated clip settings.
_Name Value
WindowPosition 700+0
Open File for Clip
Activate Clip True
Clip Over Perimeter Width (ratio): 0.5
Maximum Connection Distance Over Perimeter Width (ratio): 10.0
Format is tab separated comb settings.
_Name Value
WindowPosition 700+0
Open File for Comb
Activate Comb False
Format is tab separated comment settings.
Name Value
WindowPosition 700+0
Activate Comment False
Open File to Write Comments for
cool.csv 0 → 100644
Format is tab separated cool settings.
_Name Value
WindowPosition 700+0
Open File for Cool
Activate Cool False
Bridge Cool (Celcius): 1.0
Orbit True
Slow Down False
Maximum Cool (Celcius): 2.0
Minimum Layer Time (seconds): 15.0
Minimum Orbital Radius (millimeters): 10.0
Name of Cool End File: cool_end.gcode
Name of Cool Start File: cool_start.gcode
Turn Fan On at Beginning True
Turn Fan Off at Ending True
Format is tab separated dimension settings.
_Name Value
WindowPosition 700+0
Open File for Dimension
Activate Dimension True
Absolute Extrusion Distance True
Relative Extrusion Distance False
Extruder Retraction Speed (mm/s): 13.3
Filament Diameter (mm): 1.75
Filament Packing Density (ratio): 0.85
Retraction Distance (millimeters): 0.0
Restart Extra Distance (millimeters): 0.0
Format is tab separated export settings.
_Name Value
WindowPosition 700+0
Open File for Export
Activate Export True
Add Export Suffix True
Also Send Output To:
Do Not Delete Comments False
Delete Crafting Comments False
Delete All Comments True
Do Not Change Output True
binary_16_byte False
gcode_step False
gcode_time_segment False
gcode_small False
File Extension: gcode
Name of Replace File: replace.csv
Save Penultimate Gcode False
fill.csv 0 → 100644
Format is tab separated fill settings.
_Name Value
WindowPosition 700+0
Open File for Fill
Activate Fill: True
Diaphragm Period (layers): 100
Diaphragm Thickness (layers): 0
Extra Shells on Alternating Solid Layer (layers): 2
Extra Shells on Base (layers): 1
Extra Shells on Sparse Layer (layers): 1
Grid Circle Separation over Perimeter Width (ratio): 0.2
Grid Extra Overlap (ratio): 0.1
Grid Junction Separation Band Height (layers): 10
Grid Junction Separation over Octogon Radius At End (ratio): 0.0
Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0
Infill Begin Rotation (degrees): 45.0
Infill Begin Rotation Repeat (layers): 1
Infill Odd Layer Extra Rotation (degrees): 90.0
Grid Circular False
Grid Hexagonal False
Grid Rectangular False
Line True
Infill Perimeter Overlap (ratio): 0.3
Infill Solidity (ratio): 0.6
Infill Width over Thickness (ratio): 1.35
Solid Surface Thickness (layers): 3
Lower Left True
Nearest False
Infill > Loops > Perimeter True
Infill > Perimeter > Loops False
Loops > Infill > Perimeter False
Loops > Perimeter > Infill False
Perimeter > Infill > Loops False
Perimeter > Loops > Infill False
Format is tab separated fillet settings.
_Name Value
WindowPosition 700+0
Open File to be Filleted
Activate Fillet True
Arc Point False
Arc Radius False
Arc Segment False
Bevel True
Corner Feed Rate over Operating Feed Rate (ratio): 1.2
Fillet Radius over Perimeter Width (ratio): 0.35
Reversal Slowdown Distance over Perimeter Width (ratio): 0.2
Use Intermediate Feed Rate in Corners True
Format is tab separated home settings.
_Name Value
WindowPosition 700+0
Open File for Home
Activate Home False
Name of Homing File: homing.gcode
Format is tab separated hop settings.
_Name Value
WindowPosition 700+0
Open File for Hop
Activate Hop False
Hop Over Layer Thickness (ratio): 1.0
Minimum Hop Angle (degrees): 30.0
Format is tab separated inset settings.
_Name Value
WindowPosition 700+0
Open File for Inset
Add Custom Code for Temperature Reading True
Bridge Width Multiplier (ratio): 1.0
Ascending Area True
Descending Area False
Overlap Removal Width over Perimeter Width (ratio): 0.6
Turn Extruder Heater Off at Shut Down False
Format is tab separated interpret settings.
Name Value
WindowPosition 700+0
Open File for Interpret
Activate Interpret False
Print Interpretion False
Text Program: webbrowser
Format is tab separated jitter settings.
_Name Value
WindowPosition 700+0
Open File for Jitter
Activate Jitter True
Jitter Over Perimeter Width (ratio): 2.0
Format is tab separated lash settings.
_Name Value
WindowPosition 700+0
Open File for Lash
Activate Lash False
X Backlash (mm): 0.2
Y Backlash (mm): 0.3
Format is tab separated limit settings.
_Name Value
WindowPosition 700+0
Open File for Limit
Activate Limit True
Maximum Initial Feed Rate (mm/s): 1.0
Maximum Z Feed Rate (mm/s): 1.0
Format is tab separated multiply settings.
_Name Value
WindowPosition 700+0
Open File for Multiply
Activate Multiply: True
Center X (mm): 100.0
Center Y (mm): 100.0
Number of Columns (integer): 1
Number of Rows (integer): 1
Separation over Perimeter Width (ratio): 15.0
0% Loading or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment