initiale konfiguration warphab mit homematic und openhab

all/common/tasks/main.yml

@@ -4,8 +4,22 @@
 - name: create motd file
   template: src=motd.j2 dest=/etc/motd
 
+- name: install apt-transport-https packages before adding sources 
+  apt:
+    pkg: "{{ item }}"
+    update_cache: yes
+    state: installed
+  with_items:
+    - apt-transport-https
+
+- name: add debian repo keys 
+  apt_key:
+    url: "{{ item }}"
+    state: present
+  with_items: "{{ debian_keys }}"
+  
 - name: set debian repos 
-  template: src=sources.list.j2 dest=/etc/apt/sources.list 
+  template: src=sources.list.j2 dest=/etc/apt/sources.list   
 
 - name: install common packages
   apt:
@@ -13,10 +27,10 @@
     update_cache: yes
     state: installed
   with_items:
-    - psmisc
-    - tmux
     - vim
     - wget
+    - psmisc
+    - tree
 
 - name: deploy sshd config  
   template: src=sshd_config.j2 dest=/etc/ssh/sshd_config 

group_vars/raspbianjessie

 
 # Gruppen-Spezifishe Variablen 
 
-debian_sources: 
-  - "deb http://mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi"
-  
   
\ No newline at end of file

host_vars/vorstandspi

 
 # Host spezifische Variablen 
 
+debian_sources: 
+  - "deb http://mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi"
+  
 administratorenteam:
   - "da1l6"
   - "larsm"

host_vars/warphab

+
+# Host spezifische Variablen 
+
+debian_sources: 
+  - "deb http://mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi"
+  - "deb https://homegear.eu/packages/Raspbian/ jessie/"
+  - "deb http://dl.bintray.com/openhab/apt-repo2 testing main"
+
+debian_keys:
+  - "https://homegear.eu/packages/Release.key"
+  - "https://bintray.com/user/downloadSubjectPublicKey?username=openhab"
+
+administratorenteam:
+  - "user51"
+  - "void"

hosts

@@ -20,3 +20,6 @@ webserver   ansible_ssh_host=89.163.231.226
 # Vorstands-PI
 # Auch erreichbar unter vorstand.warpzone.ms
 vorstandspi ansible_ssh_host=10.0.0.206
+
+# OpenHAB Server 
+warphab ansible_ssh_host=10.0.3.238

keyfiles/user51.pub

+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCm7uTtTym/xEWwjvN1TCsvHMBAL82ml6+L7ju7eH3S0fkQ+lXUXJIhX6AQJhITqP7qUsBlM73bCDo0GcB/b8qlg1YaqkWaN8llJ9BwExvXqZ6IXfZj7F2eRwVknmgIY39H3NQt2pgZmX1VS0uK6dK7SGao43EUiZR6YqDg/rUIz8LMHDhiRyGaa5CFG3gUe5k4aXHiyYPmNhb5Q67PK8U2Shd2EW7C97eQBE0olGHYL0S2m4Z9dZ3S6q1wp/b1aFR7/LDzlGaHZYhrSuRQeBcVQcQFyy7gjFlXWJ3mAQHzdz/ldGuobPOSzG0h49J94sLET/Q2HodTD/QDzFmqLvgZ martin@W500.lan
\ No newline at end of file

site.yml

@@ -3,6 +3,7 @@
 
 - include: all/main.yml 
 - include: vorstandspi/main.yml 
+- include: warphab/main.yml 
 - include: webserver/main.yml 
 
     

warphab/homegear/files/main.conf

+# Homegear configuration file
+
+# Default: runAsUser = root
+# runAsUser = homegear
+
+# Default: runAsGroup = root
+# runAsGroup = homegear
+
+# Default: debugLevel = 3
+debugLevel = 4
+
+# Default: memoryDebugging = false
+memoryDebugging = true
+
+# Prints log information helping in fixing errors
+# Default: devLog = false
+devLog = false
+
+# Set to false to disable core dumps. Currently to make fixing errors easier, core dumps are enabled by default.
+# Default: enableCoreDumps = true
+enableCoreDumps = true
+
+# The working directory of Homegear. E. g. core dumps are written here. If workingDirectory is empty, the
+# executable path is used.
+# Default: workingDirectory =
+workingDirectory = /var/lib/homegear
+
+# The socket files are placed into this directory. If socketPath is empty, the executable path is used.
+# Default: socketPath =
+socketPath = /var/run/homegear
+
+# If databasePath is empty, the executable path is used.
+# Default: dataPath =
+dataPath = /var/lib/homegear
+
+# Default: dataPathPermissions = 770
+# dataPathPermissions = 770
+
+# Default: dataPathUser =
+# dataPathUser = homegear
+
+# Default: dataPathGroup =
+# dataPathGroup = homegear
+
+# If databaseMemoryJournal is set to true, database write operations are faster but if your system
+# suffers a power loss the database might get corrupted.
+# Default: databaseMemoryJournal = false
+databaseMemoryJournal = false
+
+# If databaseWALJournal is set to true database write operations are faster. This is more secure than
+# settings databaseMemoryJournal. databaseWALJournal and databaseMemoryJournal cannot be used together.
+# Default: databaseWALJournal = true
+databaseWALJournal = true
+
+# If databaseSynchronous is set to false database write operations are faster but if your system
+# suffers a power loss the database might get corrupted.
+# Default: databaseSynchronous = true
+databaseSynchronous = true
+
+# databaseMaxBackups defines the maximum number of database backups to create. When this number is reached,
+# old backups are deleted.
+# Default: databaseMaxBackups = 10
+databaseMaxBackups = 10
+
+# Default: logfilePath = /var/log/homegear
+logfilePath = /var/log/homegear
+
+# Enable
+# Default: enableUPnP = true
+enableUPnP = true
+
+# Sets the IP address, the UPnP server listens on. By default auto discovery is used, but this might not work,
+# if multiple interfaces exist. Only set specific IP addresses not "0.0.0.0".
+# Default: uPnPIpAddress =
+# uPnPIpAddress =
+
+# Sets the IP address, the SSDP server listens on. By default auto discovery is used, but this might not work,
+# if multiple interfaces exist. Only set specific IP addresses not "0.0.0.0".
+# Default: ssdpIpAddress =
+# ssdpIpAddress =
+
+# Sets the port number, the SSDP server listens on. By default Homegear listens on port 1900, but this might not work,
+# if other processes listen in this port as well.
+# Default: ssdpPort = 1900
+# ssdpPort =
+
+#### SSL options ####
+# You can create a new certificate pair with:
+# openssl genrsa -out /etc/homegear/homegear.key 2048
+# openssl req -new -key /etc/homegear/homegear.key -out /etc/homegear/homegear.csr
+# openssl x509 -req -in /etc/homegear/homegear.csr -signkey /etc/homegear/homegear.key -out /etc/homegear/homegear.crt
+
+# Default: certPath = /etc/homegear/homegear.crt
+certPath = /etc/homegear/homegear.crt
+
+# Default: keyPath = /etc/homegear/homegear.key
+keyPath = /etc/homegear/homegear.key
+
+# When "loadDHParamsFromFile" is set to "false", Diffie-Hellman parameters will be generated when Homegear starts.
+# That actually is more secure, but the generation takes a long time on slow computers.
+# Default: loadDHParamsFromFile = true
+loadDHParamsFromFile = true
+
+# Default: dhParamPath = /etc/homegear/dh1024.pem
+dhParamPath = /etc/homegear/dh1024.pem
+
+# Path to device description files
+# Default: /etc/homegear/devices
+deviceDescriptionPath = /etc/homegear/devices
+
+# Path to the RPC clients event server settings file.
+# Default: clientSettingsPath = /etc/homegear/rpcclients.conf
+clientSettingsPath = /etc/homegear/rpcclients.conf
+
+# Path to the RPC server settings file.
+# Default: serverSettingsPath = /etc/homegear/rpcservers.conf
+serverSettingsPath = /etc/homegear/rpcservers.conf
+
+# Path to the MQTT settings file.
+# Default: mqttSettingsPath = /etc/homegear/mqtt.conf
+mqttSettingsPath = /etc/homegear/mqtt.conf
+
+# Path to the device family config files.
+# Default: familyConfigPath = /etc/homegear/families
+familyConfigPath = /etc/homegear/families
+
+# Path to php.ini.
+# Default: phpIniPath = /etc/homegear/php.ini
+phpIniPath = /etc/homegear/php.ini
+
+# Path to the GPIO root directory. Only relevant if one of the physical devices needs GPIO access.
+# Default: gpioPath = /sys/class/gpio
+gpioPath = /sys/class/gpio
+
+# Export these GPIOs and set permissions when running Homegear with "-s".
+# exportGpios = 5, 6, 7
+
+# Path to scripts which can be executed by calling "runScript"
+# Default: scriptPath = /var/lib/homegear/scripts
+scriptPath = /var/lib/homegear/scripts
+
+# Default: scriptPathPermissions = 770
+# scriptPathPermissions = 770
+
+# Default: scriptPathUser =
+# scriptPathUser = homegear
+
+# Default: scriptPathGroup =
+# scriptPathGroup = homegear
+
+# Path to the family modules.
+# Default: modulePath = /var/lib/homegear/modules
+modulePath = /var/lib/homegear/modules
+
+# Path to the directory with firmware updates
+# Default: firmwarePath = /usr/share/homegear/firmware
+firmwarePath = /usr/share/homegear/firmware
+
+# Path to a directory where Homegear can store temporary data
+# Default: tempPath = /var/lib/homegear/tmp
+tempPath = /var/lib/homegear/tmp
+
+# Some clients don't provide the option to set their hostname to
+# "localhost" or "127.0.0.1" so a SSH tunnel normally wouldn't work.
+# To redirect communication to a client's XML RPC event server through a
+# SSH tunnel in this case, specify the client's XML RPC server address
+# here. Homegear replaces the provided address (or hostname) with
+# 127.0.0.1 (or ::1 when IPv6 is used). Multiple entries are allowed.
+# redirectToSSHTunnel = 192.168.0.1
+# redirectToSSHTunnel = fdef:abcd:bcda::1234
+# redirectToSSHTunnel = 192.168.0.10
+# redirectToSSHTunnel = MyHostname
+
+# Some clients (like the CCU2) send localhost as address to a remote Homegear
+# installation. Homegear then tries to connect to localhost which of course
+# fails. As a workaround Homegear can replace the address sent from the client
+# with a working address. $REMOTEIP is replaced automatically with the remote ip
+# address.
+#                                Address to search for          Address to use
+#                                          |                           |
+#                                          V                           V
+replaceClientServerAddress = xmlrpc_bin://127.0.0.1:1999 xmlrpc_bin://$REMOTEIP:1999
+replaceClientServerAddress = http://127.0.0.1:9292/bidcos http://$REMOTEIP:9292/bidcos
+
+#### !!!Don't change settings below unless you know exactly what you're doing!!! ####
+#### !!!Don't change settings below unless you know exactly what you're doing!!! ####
+#### !!!Don't change settings below unless you know exactly what you're doing!!! ####
+
+# Default: prioritizeThreads = true
+prioritizeThreads = true
+
+# Default: workerThreadWindow = 3000
+workerThreadWindow = 3000
+
+# Default scriptEngineMaxThreadsPerScript = 4
+scriptEngineMaxThreadsPerScript = 4
+
+# Default scriptEngineMaxScriptsPerProcess = -1
+scriptEngineMaxScriptsPerProcess = 50
+
+# Default scriptEngineThreadCount = 10
+scriptEngineThreadCount = 10
+
+# Default: scriptEngineServerMaxConnections = 10
+scriptEngineServerMaxConnections = 10
+
+# Default: cliServerMaxConnections = 50
+cliServerMaxConnections = 50
+
+# Default: rpcServerMaxConnections = 50
+rpcServerMaxConnections = 50
+
+# Default: rpcServerThreadPriority = 0
+rpcServerThreadPriority = 0
+
+# Default: rpcServerThreadPolicy = SCHED_OTHER
+# Valid policies: SCHED_OTHER, SCHED_BATCH, SCHED_IDLE, SCHED_FIFO, SCHED_RR
+rpcServerThreadPolicy = SCHED_OTHER
+
+# Default: rpcClientMaxServers = 50
+rpcClientMaxServers = 50
+
+# Default: rpcClientThreadPriority = 0
+rpcClientThreadPriority = 0
+
+# Default: rpcClientThreadPolicy = SCHED_OTHER
+# Valid policies: SCHED_OTHER, SCHED_BATCH, SCHED_IDLE, SCHED_FIFO, SCHED_RR
+rpcClientThreadPolicy = SCHED_OTHER
+
+# Default: workerThreadPriority = 0
+workerThreadPriority = 0
+
+# Default: workerThreadPolicy = SCHED_OTHER
+# Valid policies: SCHED_OTHER, SCHED_BATCH, SCHED_IDLE, SCHED_FIFO, SCHED_RR
+workerThreadPolicy = SCHED_OTHER
+
+# Default: packetQueueThreadPriority = 45
+packetQueueThreadPriority = 45
+
+# Default: packetQueueThreadPolicy = SCHED_FIFO
+# Valid policies: SCHED_OTHER, SCHED_BATCH, SCHED_IDLE, SCHED_FIFO, SCHED_RR
+packetQueueThreadPolicy = SCHED_FIFO
+
+# Default: packetReceivedThreadPriority = 0
+packetReceivedThreadPriority = 0
+
+# Default: packetReceivedThreadPolicy = SCHED_OTHER
+# Valid policies: SCHED_OTHER, SCHED_BATCH, SCHED_IDLE, SCHED_FIFO, SCHED_RR
+packetReceivedThreadPolicy = SCHED_OTHER
+
+# Default: eventMaxThreads = 20
+eventThreadCount = 5
+
+# Default: eventThreadPriority = 0
+eventThreadPriority = 0
+
+# Default: eventThreadPolicy = SCHED_OTHER
+# Valid policies: SCHED_OTHER, SCHED_BATCH, SCHED_IDLE, SCHED_FIFO, SCHED_RR
+eventThreadPolicy = SCHED_OTHER

warphab/homegear/files/max.conf

+___________________________________________________________________________
+
+---------------------------------- MAX!  ----------------------------------
+___________________________________________________________________________
+
+#######################################
+################# CUL #################
+#######################################
+
+## The device family this interface is for
+#[CUL]
+
+## Specify an unique id here to identify this device in Homegear
+#id = My-MAX-CUL
+
+## When default is set to "true" Homegear will assign this device
+## to new peers.
+#default = true
+
+## Options: cul, coc, cc1100
+#deviceType = cul
+
+#device = /dev/ttyACM0
+
+## Should be "40" for MAX!
+#responseDelay = 40
+
+#######################################
+########## TI CC1101 Module  ##########
+#######################################
+
+## The device family this interface is for
+#[TI CC1101 Module]
+
+## Specify an unique id here to identify this device in Homegear
+#id = My-MAX-CC1101
+
+## When default is set to "true" Homegear will assign this device
+## to new peers.
+#default = true
+
+## Options: cul, coc, cc1100
+#deviceType = cc1100
+
+#device = /dev/spidev0.0
+
+## Default: responseDelay = 95
+## Should be "40" for CUL or COC and "45" for TI CC1101.
+#responseDelay = 45
+
+## The interrupt pin to use. "0" for GDO0 or "2" for GDO2.
+## You only need to connect one of them. Specify the GPIO
+## you connected the interrupt pin to below.
+#interruptPin = 2
+
+## The GPIO GDO0 or GDO2 is connected to. Specify which GDO to use above.
+#gpio1 = 23
+
+### Additional TI CC1190 Config ###
+
+## The GPIO high gain mode of the CC1190 is connected to.
+## Default: -1 (disabled)
+#gpio2 = 5
+
+## The hexadecimal value for the PATABLE of the TI CC1101.
+## Default:
+## - Without high gain mode: 0xC2
+## - With high gain mode: 0x27 (maximum legally allowed setting)
+#txPowerSetting = 0x27
+
+#######################################
+################ CUNX  ################
+#######################################
+
+## The device family this interface is for
+#[CUNX]
+
+## Specify an unique id here to identify this device in Homegear
+#id = My-CUNX
+
+## When default is set to "true" Homegear will assign this device
+## to new peers.
+#default = true
+
+## Options: cul, cc1100, coc, cunx, hmcfglan, hmlgw
+#deviceType = cunx
+
+## IP address of your CUNO
+#host = 192.168.178.100
+
+## Port number your CUNX listens on. Normally 2323.
+#port = 2323
+
+## Default: responseDelay = 95
+## Should be "40" for CUNX
+#responseDelay = 40

warphab/homegear/handlers/main.yml

+---
+- name: restart homegear
+  service: name=homegear state=restarted

warphab/homegear/tasks/main.yml

+---
+
+- name: install packages
+  apt:
+    pkg: "{{ item }}"
+    update_cache: yes
+    state: installed
+  with_items:
+    - homegear 
+    - homegear-max
+  notify: restart homegear
+
+- name: main.conf
+  copy: src=main.conf dest=/etc/homegear/main.conf
+  notify: restart homegear
+ 
+- name: max.conf
+  copy: src=max.conf dest=/etc/homegear/families/max.conf
+  notify: restart homegear

warphab/main.yml

+---
+# Rollen, die nur auf dem WarpHAB-Server verwendet werden 
+
+- hosts: warphab 
+  remote_user: root
+  roles:
+    - { role: homegear, tags: homegear }
+    - { role: openhab, tags: openhab }

warphab/openhab/handlers/main.yml

+---
+- name: restart openhab
+  service: name=openhab2 state=restarted

warphab/openhab/tasks/main.yml

+---
+
+- name: install packages
+  apt:
+    pkg: "{{ item }}"
+    update_cache: yes
+    state: installed
+  with_items:
+    - oracle-java8-jdk
+    - openhab2-offline 
+  notify: restart openhab
+
+#- name: main.conf
+#  copy: src=main.conf dest=/etc/homegear/main.conf
+#  notify: restart openhab
+ 
+#- name: homematicbidcos.conf
+#  copy: src=homematicbidcos.conf dest=/etc/homegear/families/homematicbidcos.conf
+#  notify: restart openhab