intern/docker_esphome/templates/config/esphome_plug08.yaml

+{% set devicename = "esphome_plug08"  %}
+
+{% include "/includes/ansible.inc.yaml" %}
+{% include "/includes/board.esp01_1m.inc.yaml" %}
+
+  comment: WLED Vorhang
+{% include "/includes/common.inc.yaml" %}
+
+  on_message:
+    - topic: ESPHome/{{ devicename }}/state/command
+      payload: "ON"
+      then:
+        - switch.turn_on: relay
+    - topic: ESPHome/{{ devicename }}/state/command
+      payload: "OFF"
+      then:
+        - switch.turn_off: relay
+    - topic: warpzone/door/status_once
+      payload: "OPEN"
+      then:
+        - switch.turn_on: relay
+        
+substitutions:
+  plug_name: {{ devicename }}
+  # Higher value gives lower watt readout
+  current_res: "0.00221"
+  # Lower value gives lower voltage readout
+  voltage_div: "920"
+
+binary_sensor:
+  # Binary sensor for the button press
+  - platform: gpio
+    name: "${plug_name}_button"
+    pin:
+      number: GPIO3
+      inverted: true
+    on_press:
+      - switch.toggle: relay
+      
+
+   
+switch:
+  - platform: gpio
+    id: relay
+    name: "${plug_name}_Relay"
+    restore_mode: ALWAYS_OFF
+    pin: GPIO14
+    on_turn_on:
+      - light.turn_on: led
+    on_turn_off:
+      - light.turn_off: led
+sensor:
+  - platform: hlw8012
+    sel_pin:
+      number: GPIO12
+      inverted: True
+    cf_pin: GPIO04
+    cf1_pin: GPIO05
+    current_resistor: ${current_res}
+    voltage_divider: ${voltage_div}
+    current:
+      name: "${plug_name}_Amperage"
+      unit_of_measurement: A
+    voltage:
+      name: "${plug_name}_Voltage"
+      unit_of_measurement: V
+    power:
+      name: "${plug_name}_Wattage"
+      unit_of_measurement: W
+      id: "${plug_name}_Wattage"
+    change_mode_every: 8
+    update_interval: 10s
+  - platform: total_daily_energy
+    name: ${plug_name}_Energy
+    power_id: "${plug_name}_Wattage"
+
+# Enable time for energy monitoring
+time:
+  - platform: sntp
+    
+output:
+  # Relay state led
+  - platform: esp8266_pwm
+    id: state_led
+    pin:
+      number: GPIO1
+      inverted: true
+
+light:
+  # Relay state light
+  - platform: monochromatic
+    output: state_led
+    id: led
+
+# Uses the red LED as a status indicator
+status_led:
+  pin:
+    number: GPIO13
+    inverted: true

intern/docker_esphome/templates/config/esphome_status.yaml

+{% set devicename = "esphome_status"  %}
+
+{% include "/includes/ansible.inc.yaml" %}
+{% include "/includes/board.esp32dev.inc.yaml" %}
+{% include "/includes/common.inc.yaml" %}
+
+binary_sensor:
+  - platform: gpio
+    pin: 
+      number: 16
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on_off: 500ms
+    name: "esphome_status_Hauptschalter"
+    device_class: presence

intern/docker_fridgeserver/templates/htaccess

+<Files *.php>
+deny from all