intern/docker_esphome/templates/config/esphome_plug04.yaml

@@ -3,7 +3,7 @@
 {% include "/includes/ansible.inc.yaml" %}
 {% include "/includes/board.esp01_1m.inc.yaml" %}
 
-  comment: Halogen Lounge
+  comment: frei
 {% include "/includes/common.inc.yaml" %}
 
   on_message:
@@ -15,6 +15,10 @@
       payload: "OFF"
       then:
         - switch.turn_off: relay
+    - topic: warpzone/door/status
+      payload: "CLOSED"
+      then:
+        - switch.turn_off: relay
 
 status_led:
   pin:

intern/docker_esphome/templates/config/esphome_plug05.yaml

@@ -15,6 +15,10 @@
       payload: "OFF"
       then:
         - switch.turn_off: relay
+    - topic: warpzone/door/status
+      payload: "CLOSED"
+      then:
+        - switch.turn_off: relay
         
 substitutions:
   plug_name: {{ devicename }}
@@ -66,6 +70,13 @@ sensor:
       id: "${plug_name}_Wattage"
     change_mode_every: 8
     update_interval: 10s
+  - platform: total_daily_energy
+    name: ${plug_name}_Energy
+    power_id: "${plug_name}_Wattage"
+
+# Enable time for energy monitoring
+time:
+  - platform: sntp
     
 output:
   # Relay state led

intern/docker_esphome/templates/config/esphome_plug06.yaml

@@ -15,6 +15,10 @@
       payload: "OFF"
       then:
         - switch.turn_off: relay
+    - topic: warpzone/door/status
+      payload: "CLOSED"
+      then:
+        - switch.turn_off: relay
         
 substitutions:
   plug_name: {{ devicename }}
@@ -66,6 +70,13 @@ sensor:
       id: "${plug_name}_Wattage"
     change_mode_every: 8
     update_interval: 10s
+  - platform: total_daily_energy
+    name: ${plug_name}_Energy
+    power_id: "${plug_name}_Wattage"
+
+# Enable time for energy monitoring
+time:
+  - platform: sntp
     
 output:
   # Relay state led

intern/docker_esphome/templates/config/esphome_plug07.yaml

@@ -3,7 +3,7 @@
 {% include "/includes/ansible.inc.yaml" %}
 {% include "/includes/board.esp01_1m.inc.yaml" %}
 
-  comment: Bullhorn Kuhhorn Muuuuh!
+  comment: Starroof Lounge
 {% include "/includes/common.inc.yaml" %}
 
   on_message:
@@ -15,6 +15,14 @@
       payload: "OFF"
       then:
         - switch.turn_off: relay
+    - topic: warpzone/door/status
+      payload: "CLOSED"
+      then:
+        - switch.turn_off: relay
+    - topic: warpzone/door/status_once
+      payload: "OPEN"
+      then:
+        - switch.turn_on: relay
         
 substitutions:
   plug_name: {{ devicename }}
@@ -66,7 +74,14 @@ sensor:
       id: "${plug_name}_Wattage"
     change_mode_every: 8
     update_interval: 10s
-    
+  - platform: total_daily_energy
+    name: ${plug_name}_Energy
+    power_id: "${plug_name}_Wattage"
+
+# Enable time for energy monitoring
+time:
+  - platform: sntp
+
 output:
   # Relay state led
   - platform: esp8266_pwm

intern/docker_esphome/templates/config/esphome_plug08.yaml

@@ -3,7 +3,7 @@
 {% include "/includes/ansible.inc.yaml" %}
 {% include "/includes/board.esp01_1m.inc.yaml" %}
 
-  comment: 3D Drucker Prusanet
+  comment: WLED Vorhang
 {% include "/includes/common.inc.yaml" %}
 
   on_message:
@@ -15,6 +15,10 @@
       payload: "OFF"
       then:
         - switch.turn_off: relay
+    - topic: warpzone/door/status_once
+      payload: "OPEN"
+      then:
+        - switch.turn_on: relay
         
 substitutions:
   plug_name: {{ devicename }}
@@ -66,6 +70,13 @@ sensor:
       id: "${plug_name}_Wattage"
     change_mode_every: 8
     update_interval: 10s
+  - platform: total_daily_energy
+    name: ${plug_name}_Energy
+    power_id: "${plug_name}_Wattage"
+
+# Enable time for energy monitoring
+time:
+  - platform: sntp
     
 output:
   # Relay state led

intern/docker_esphome/templates/config/esphome_popcorn.yaml

@@ -135,7 +135,7 @@ climate:
     id: pid_heater
     name: "PID Heater Controller"
     sensor: pot_sensor
-    default_target_temperature: 240
+    default_target_temperature: 220
     heat_output: pot_heater
     control_parameters:
       kp: 0.09549
@@ -168,7 +168,7 @@ sensor:
   - platform: pid
     name: "PID HEAT Result"
     type: HEAT
-  - platform: bme280
+  - platform: bme280_i2c
     temperature:
       name: "Temp"
       oversampling: 16x
@@ -339,7 +339,7 @@ color:
     blue: 0%
 
 display:
-  - platform: ili9341
+  - platform: ili9xxx
     model: TFT 2.4
     spi_id: spi_display
     cs_pin: GPIO5
@@ -349,23 +349,23 @@ display:
     pages:
       - id: page1
         lambda: |-
-          it.printf(160,120,id(text),TextAlign::CENTER,"Booting");
+          it.printf(160,120,id(text_small),TextAlign::CENTER,"Booting");
       - id: page3
         lambda: |-
           it.printf(160,120,id(temp),TextAlign::CENTER,"%.0f°C",id(pid_heater).current_temperature);
           if ((id(pid_heater).action) == 0) {
-            it.printf(0,10,id(text),TextAlign::TOP_LEFT,"PID: OFF");
+            it.printf(0,10,id(text_small),TextAlign::TOP_LEFT,"PID: OFF");
           }
           else if ((id(pid_heater).action) == 3) {
-            it.printf(0,10,id(text),TextAlign::TOP_LEFT,"PID: HEATING");
+            it.printf(0,10,id(text_small),TextAlign::TOP_LEFT,"PID: HEATING");
           }
           else if ((id(pid_heater).action) == 4) {
-            it.printf(0,10,id(text),TextAlign::TOP_LEFT,"PID: IDLE");
+            it.printf(0,10,id(text_small),TextAlign::TOP_LEFT,"PID: IDLE");
           }
           else {
-            it.printf(0,10,id(text),TextAlign::TOP_LEFT,"PID: ERROR %d",id(pid_heater).action);
+            it.printf(0,10,id(text_small),TextAlign::TOP_LEFT,"PID: ERROR %d",id(pid_heater).action);
           };
-          it.printf(0,230,id(text),TextAlign::BOTTOM_LEFT,"Target: %.1f°C",id(pid_heater).target_temperature);
+          it.printf(0,230,id(text_small),TextAlign::BOTTOM_LEFT,"Target: %.1f°C",id(pid_heater).target_temperature);
 
 time:
   - platform: sntp

intern/docker_esphome/templates/config/esphome_power.yaml

+{% set devicename = "esphome_power"  %}
+
+{% include "/includes/ansible.inc.yaml" %}
+{% include "/includes/board.esp32dev.inc.yaml" %}
+{% include "/includes/common.inc.yaml" %}
+
+uart:
+  id: modbus_uart
+  tx_pin: 18
+  rx_pin: 19
+  baud_rate: 38400
+  stop_bits: 1
+
+modbus:
+  send_wait_time: 500ms
+  uart_id: modbus_uart
+  id: modbus_sdm
+
+modbus_controller:
+    - id: sdm630m
+      address: 0x01
+      modbus_id: modbus_sdm
+      update_interval: 20s
+
+sensor:
+
+  - platform: sdm_meter
+    
+    phase_a:
+      current:
+        name: "Phase 1 Current"
+      voltage:
+        name: "Phase 1 Voltage"
+      active_power:
+        name: "Phase 1 Power"
+      power_factor:
+        name: "Phase 1 Power Factor"
+      apparent_power:
+        name: "Phase 1 Apparent Power"
+      reactive_power:
+        name: "Phase 1 Reactive Power"
+      phase_angle:
+        name: "Phase 1 Phase Angle"
+  
+    phase_b:
+      current:
+        name: "Phase 2 Current"
+      voltage:
+        name: "Phase 2 Voltage"
+      active_power:
+        name: "Phase 2 Power"
+      power_factor:
+        name: "Phase 2 Power Factor"
+      apparent_power:
+        name: "Phase 2 Apparent Power"
+      reactive_power:
+        name: "Phase 2 Reactive Power"
+      phase_angle:
+        name: "Phase 2 Phase Angle"
+  
+    phase_c:
+      current:
+        name: "Phase 3 Current"
+      voltage:
+        name: "Phase 3 Voltage"
+      active_power:
+        name: "Phase 3 Power"
+      power_factor:
+        name: "Phase 3 Power Factor"
+      apparent_power:
+        name: "Phase 3 Apparent Power"
+      reactive_power:
+        name: "Phase 3 Reactive Power"
+      phase_angle:
+        name: "Phase 3 Phase Angle"
+    
+    frequency:
+      name: "Frequency"
+    total_power:
+      name: "Total Power"
+    import_active_energy:
+      name: "Import Active Energy"
+      id: import_energy
+    export_active_energy:
+      name: "Export Active Energy"
+      id: export_energy
+    import_reactive_energy:
+      name: "Import Reactive Energy"
+    export_reactive_energy:
+      name: "Export Reactive Energy"
+    update_interval: 20s
+    
+  - platform: template
+    name: "Net Consumption Energy"
+    accuracy_decimals: 2
+    update_interval: 20s
+    unit_of_measurement: 'kWh'
+    state_class: total
+    lambda: return id(import_energy).state - id(export_energy).state;
+
+binary_sensor:
+  - platform: status
+    name: "SDM630 Status"

intern/docker_esphome/templates/config/esphome_sceneswitches.yaml

+{% set devicename = "esphome_sceneswitches"  %}
+
+{% include "/includes/ansible.inc.yaml" %}
+{% include "/includes/board.d1_mini.inc.yaml" %}
+
+  comment: Die Box zum einstellen unterschiedlicher Lichtszenen
+{% include "/includes/common.inc.yaml" %}
+
+binary_sensor:
+  - platform: gpio
+    pin: 
+      number: GPIO5
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on: 10ms
+    name: "Button 1"
+  - platform: gpio
+    pin: 
+      number: GPIO12
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on: 10ms
+    name: "Button 2"
+  - platform: gpio
+    pin: 
+      number: GPIO13
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on: 10ms
+    name: "Button 3"
+  - platform: gpio
+    pin: 
+      number: GPIO2
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on: 10ms
+    name: "Button 4"
+  - platform: gpio
+    pin: 
+      number: GPIO0
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on: 10ms
+    name: "Button 5"  
+  - platform: gpio
+    pin: 
+      number: GPIO4
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+    filters:
+      - delayed_on: 10ms
+    name: "Button 6"

intern/docker_esphome/templates/config/esphome_status.yaml

-
 {% set devicename = "esphome_status"  %}
 
 {% include "/includes/ansible.inc.yaml" %}
-{% include "/includes/board.d1_mini.inc.yaml" %}
+{% include "/includes/board.esp32dev.inc.yaml" %}
 {% include "/includes/common.inc.yaml" %}
 
-sensor:
-  # Das pulse_meter liefert uns die Frequenz der Impulse pro Minute am GPIO2 zu Gnd.
-  # Das Eltako Strommessgerät besitzt zwei potentialfreie S0 - Impulsausgänge.
-  # Diese werden durch einen Optokoppler jede 0.00125kWh (800 Impulse / kWh) für ca. 30ms zueinander leitend.
-  # Hier schließen wir an den einen Kontakt GPIO2 und an den anderen Gnd an.
-  - platform: pulse_meter
-    pin: 
-      number: GPIO13
-      mode:
-        input: true
-        pullup: true
-    unit_of_measurement: 'kW'
-    name: 'Stromverbrauch'
-    # Herausfilterung von fehlerhaften Impulsen < 20ms
-    internal_filter: 20ms
-    # Genauigkeit auf 1 Watt
-    accuracy_decimals: 3
-    filters:
-      # (800 Impulse / kWh)^-1 * (60 min / h) * (Impulse / min) = 0.075 kW
-      - multiply: 0.075
-    # Totaler Stromverbrauch seitdem der ESP läuft
-    # Eventuell noch abändern auf Stromverbrauch Heute / Woche / Monat und reset durch time (sntp?)
-    total:
-      name: "Strom total"
-      unit_of_measurement: "kWh"
-      # Genauigkeit auf 1 Watt
-      accuracy_decimals: 3
-      filters:
-        # (800 Impulse / kWh)^-1 = 0.00125kWh
-        - multiply: 0.00125
 binary_sensor:
   - platform: gpio
     pin: 
-      number: GPIO12
+      number: 16
       mode:
         input: true
         pullup: true
       inverted: true
-    name: "warpzone Status"
+    filters:
+      - delayed_on_off: 500ms
+    name: "esphome_status_Hauptschalter"
     device_class: presence

intern/docker_esphome/templates/config/esphome_switchboard.yaml

+
+{% set devicename = "esphome_switchboard"  %}
+
+{% include "/includes/ansible.inc.yaml" %}
+{% include "/includes/board.d1_mini.inc.yaml" %}
+  
+  comment: Ist kaputt
+{% include "/includes/common.inc.yaml" %}
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO13
+      mode: INPUT_PULLUP
+      inverted: True
+    name: "{{ devicename }} Button"
+    on_press:
+      - 
+  - platform: status
+    name: "{{ devicename }} Status"
+
+switch:
+  - platform: virtual 
+    name: "MQTT Switch Test"
+    id: "switch1"
+    payload_off: "OFF"
+    payload_on: "ON"
+    retain: true

intern/docker_esphome/templates/config/esphome_vortragsraum.yaml

@@ -19,7 +19,7 @@ dallas:
 
 # Sensor configs
 sensor:
-  - platform: bme280
+  - platform: bme280_i2c
     temperature:
       name: "Temp"
       oversampling: 16x
@@ -79,4 +79,4 @@ sensor:
       - sliding_window_moving_average:
           window_size: 3
           send_every: 3
-          send_first_at: 3
\ No newline at end of file
+          send_first_at: 3

intern/docker_esphome/templates/docker-compose.yml

-version: "3"
-
 services:
 
   app:
 
-    image: esphome/esphome:2022.10
+    image: esphome/esphome:latest
     restart: always
     volumes:
       - "{{ basedir }}/config/:/config"

intern/docker_esphome/templates/includes/board.esp32dev.inc.yaml

+
+esphome:
+  name: "{{ devicename }}"
+  friendly_name: "{{ devicename }}"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino

intern/docker_esphome-dev/templates/includes/board.d1_mini.inc.yaml → intern/docker_esphome/templates/includes/board.esp8266.inc.yaml

@@ -2,4 +2,3 @@
 esphome:
   name: "{{ devicename }}"
   platform: ESP8266
-  board: d1_mini

intern/docker_esphome/templates/includes/common.inc.yaml

@@ -14,6 +14,7 @@ captive_portal:
 
 # Enable OTA
 ota:
+  - platform: esphome
 
 # Enable logging
 logger:
@@ -25,8 +26,8 @@ logger:
 web_server:
 #  local: true
 
-# Activates prometheus /metrics endpoint
-prometheus:
+# Activates api for home assistant
+api:
 
 # MQTT config 
 mqtt:

intern/docker_esphome/templates/includes/common_info.inc.yaml

@@ -27,8 +27,8 @@ logger:
 web_server:
 #  local: true
 
-# Activates prometheus /metrics endpoint
-prometheus:
+# Activates api for home assistant
+api:
 
 # MQTT config 
 mqtt:

intern/docker_fridgeserver/tasks/main.yml

+---
+
+- name: "create folder struct for {{ servicename }}"
+  ansible.builtin.file:
+    path: "{{ item }}"
+    state: "directory"
+    recurse: yes
+    owner: 33
+    group: 33
+  with_items:
+    - "{{ basedir }}/audio_files/"
+
+- name: copy config files for {{ servicename }}
+  ansible.builtin.template:
+    src: "{{ item }}" 
+    dest: "{{ basedir }}/{{ item }}"
+    mode: '0755'
+  with_items:
+    - docker-compose.yml
+  register: config_files
+
+- name: "stop {{ servicename }} docker"
+  community.docker.docker_compose_v2:
+    project_src: "{{ basedir }}"
+    state: absent
+  when: config_files.changed 
+
+- name: "start {{ servicename }} docker"
+  community.docker.docker_compose_v2:
+    project_src: "{{ basedir }}"
+    state: present

intern/docker_fridgeserver/templates/docker-compose.yml

+---
+
+services:
+
+  app:
+    image: gitlab-registry.warpzone.ms/nandxor/fridge-audioserver:latest 
+    restart: always
+    environment:
+      PDIG: 1001
+      PUDI: 1001
+    volumes:
+      - "{{ basedir }}/audio_files:/var/www/html/audio"
+    ports:
+      - "5000:80"
+    labels:
+      - traefik.enable=false
+    networks:
+      - default
+      - web
+
+networks:
+  web:
+    external: true
+
+volumes:
+  audio_files:

intern/docker_fridgeserver/templates/htaccess

+<Files *.php>
+deny from all

intern/docker_grafana/tasks/main.yml

+
+
+- include_tasks: ../functions/get_secret.yml
+  with_items:
+    - { path: "{{ basedir }}/grafana_secret_key", length: 32 }
+    - { path: "{{ basedir }}/grafana_admin_pass", length: 12 }
+    - { path: "/srv/mqtt/influxdb_token", length: -1 }
+
+- name: "create folder struct for {{ servicename }} 1"
+  file: 
+    path: "{{ item }}"
+    state: "directory"
+  with_items:
+    - "{{ basedir }}"
+
+- name: "create folder struct for {{ servicename }} 2"
+  file:
+    path: "{{ item }}"
+    state: "directory"
+    owner: 472
+    group: 0
+  with_items:
+    - "{{ basedir }}/data/"   
+    - "{{ basedir }}/provisioning/"
+    - "{{ basedir }}/provisioning/dashboards/"
+    - "{{ basedir }}/provisioning/dashboards/pixelflut/"
+    - "{{ basedir }}/provisioning/datasources/"
+
+- name: "create config files for {{ servicename }}"
+  template: 
+    src: "{{ item }}" 
+    dest: "{{ basedir }}/{{ item }}"
+  with_items:
+    - docker-compose.yml
+    - grafana.ini
+    - provisioning/dashboards/dashboards.yml
+    - provisioning/dashboards/pixelflut/breakwater.json
+    - provisioning/datasources/datasources.yml
+  register: config_files
+
+- name: "stop {{ servicename }} docker"
+  community.docker.docker_compose_v2:
+    project_src: "{{ basedir }}"
+    state: absent
+  when: config_files.changed 
+
+- name: "start {{ servicename }} docker"
+  community.docker.docker_compose_v2:
+    project_src: "{{ basedir }}"
+    state: present